Ningbo Hewcho

Generally speaking, the tolerance of inner bore can reach 0.02MM(or 0.03 if it is stainless steel or quick cutting steel products), and the roughness of inner bore can be as high as 0.8 through hook knife and step hole (except eccentric hole) through forming drill.  We can develop various parts and hardware non-standard turning parts according to the customer's drawing surface. Aluminum  CNC turning machine parts , precision non-standard turning parts, and lathe parts: It is produced by easy-cutting steel hexagonal rods. The tolerance of hexagonal rods and round rods selected by our factory is only -0.02MM. The hexagonal rods are fine-drawn, and the round rods are polished rods. Non-standard turning parts: It is completed in one time with an automatic lathe. The spherical surface precision is 0.01mm. This is also impossible for cold piers. The surface of the product can achieve the same mirror effect (not the effect of polishing, but only the effect of turning left is ...

1.Mobile phone nut Mobile phone nutMobile phone nuts are classified by material: copper and stainless steel. The copper nut of mobile phone generally USES the following material: C3604 yellow Copper, HPB59 series brass. Mobile phone  stainless steel parts  generally used: SUS303 or SUS304 or SUS416 stainless steel materials. The mobile phone nut is classified according to the parts used on the mobile phone: the mobile phone nut is usually used in the plastic case of the mobile phone and the internal stamping parts of the mobile phone. The main function is to connect the plastic parts with other parts of the mobile phone, and also make the mobile phone stamping parts and other mobile phones. The parts are joined for fastening. Mobile phone nuts are classified according to shape and appearance: divided into embossed nuts, knurled nuts, straight flower nuts, twill nuts, textured nuts, herringbone nuts T-nuts, round nuts, cap nuts, wing nuts, Hexagon nuts, ring nuts, square nuts, ...

Surface processing of CNC metal parts: 1. Spray paint processing: the hardware factory adopts spray paint processing in the production of large pieces of finished  metal machined parts . By spray paint processing, the  metal machined parts  can avoid rust, such as daily articles, electrical shells, handicrafts, etc. 2.Electroplating: electroplating is also the most common processing technology for  CNC metal parts  processing. Through modern technology, the surface of hardware is electroplated to ensure that no mildew and raw embroidery will occur when the product is used for a long time.  3.Surface polishing: Surface polishing is generally used in daily necessities. Surface burr treatment is performed on  CNC metal parts . For example, we produce a comb, which is a piece of  CNC metal parts  that are stamped, so the corner of the comb is very Sharp, we have to polish the sharp part of the corner into a smooth face, so that it will not cause ...

The company's products are widely used in high-tech electronic products, hardware products, bearings, automobiles, bicycles, toys, electric vehicles, electronic appliances, power tools, construction, luggage hardware, plastic accessories, Furniture, medical equipment, gardening tools, lighting, sports equipment and other fields. Steps   1. All employees check whether their clothing meets the job requirements before entering the job. Do not wear slippers, high heels, and clothing that affects safety. Wear long hats for safety. Maintain a correct posture at work, have sufficient spirit to cope with the work, if you find physical discomfort, you should leave the job immediately and report to the leader. It is necessary to concentrate on the operation, and it is strictly forbidden to talk and cooperate with each other. The operator must not operate under the irritability and fatigue, so as to avoid accidents and ensure safe operation. 2. Check whether the moving part is filled wi...

Firstly, Cutting the amount of turning parts 1. Cutting speed VC Cutting speed has a complicated influence on surface roughness. Generally, there will be no debris tumor when cutting at low speed or at high speed, so the surface roughness value after processing is small. Higher cutting speed can also greatly improve productivity. For example, YT15 is used to cut 35 steel, and the critical cutting speed is v > 100m/min. 2. The surface roughness value will be reduced by appropriately reducing the feed amount f. 3. Generally speaking, the effect of cutting depth ap on the roughness of the machined surface is not obvious. However, when ap < 0.02~0.03mm, due to the influence of machining radius, extrusion, skidding and periodic cutting of the machined surface often occur, thus increasing the surface roughness. In order to reduce the surface roughness, the cutting depth should be selected according to the sharpness of cutting edge grinding. Secondly, Machining tool parameters for turni...

A  stainless steel part  is a part that is processed by a lathe on a lathe. The shape and size of the blank are changed by the rotary motion of the workpiece and the linear motion or curved motion of the cutter, and it is processed to meet the requirements of the drawings.  Custom stainless steel parts  machining is a method of machining a workpiece on a lathe by turning it relative to the tool. The cutting power of turning can be provided primarily by the workpiece rather than the cutter. Turning is the most basic and common machining method, which plays a very important role in the production. Turning is suitable for machining rotary surfaces. Most workpieces with rotary surfaces can be machined by turning, such as inner and outer cylindrical surfaces, inner and outer conical surfaces, end faces, grooves, threads and rotary forming surfaces. The tools used are mainly turning tools. The precision of turning to the machine is generally IT11-IT7, and some can reach IT...

CNC lathe technology is currently the most widely used. We have talked about that some products which are difficult to be processed by general machine tools need to adopt CNC lathe technology. So what are the main processing objects and contents of this technology? Although CNC lathes are similar in structure and processing technology to ordinary lathes,  CNC turning parts  in  China  are controlled by electronic computer digital signals through pre-programmed machining programs, so there are many differences. It has many requirements, high machining precision, automatic shifting, and linear and arc interpolation. The ordinary lathe cannot meet these conditions, and the processing range is not wide. Therefore, compared with the ordinary lathe, the main processing contents of  CNC turning parts  are turning outer circle, turning inner hole, turning end face and turning thread. The main processing objects are also the following. 1. Parts with high pre...